The camshaft sensor calibration device VAS 652 007 is used exclusively for calibrating the following camshaft sensors:
• PAG 0P2 907 601
• PAG 0P2 907 601A

The batteries can be charged in the device using the charging cable supplied. Any available software updates can be programmed onto the device using the supplied USB cable. The calibration device VAS 652 007 switches itself off automatically after 10 minutes if it is not operated.

Spare parts (will be available for order soon)
1) Charging cable VAS 652 007/2 (ASE 652 008 00 B00)
2) Sensor cable VAS 652 007/3 (ASE 652 008 00 C00)
3) Update cable VAS 652 007/4 (ASE 652 008 00 D00)

Technical data:

Battery operation: 3x AAA NiMH batteries
Input voltage: 5 V DC to connect an external 5 V charger with USB-A socket (not included in the scope of supply; for information, see the operating manual)
USB 2.0 (high-powered port) min. 4.75 V - max. 5.25 V
Overvoltage protection with TVS diode, reverse polarity protection
Input current: Nominal: 300mA
Internal frequency: Maximum: 48MHz
Operating environment: Operating temperature: 0°C to +45°C, 10°C–40°C in charging mode
Relative humidity: 10% to 80 [% rel. humidity] at 25 °C, no condensation
Storage conditions: Storage temperature: -20 °C to +55 °C
Relative humidity: Up to 100% [% rel. humidity] at 25 °C, no condensation
Output voltage/current: Nominal: +5V/150mA
All sensor outputs (signal, supply) have sustained short-circuit protection.

Dimensions (L, W, H): 125.5mm * 69.0mm * 43.4mm
Weight including batteries: Approx. 190g

** Class 2 (NEC)/LPS (UL60950-1)

Cable lengths:
Charging cable VAS 652 007/2: 0.80 m
Sensor cable VAS 652 007/3: 1.20 m
Update cable VAS 652 007/4: 0.20 m

Identification color:
VAS 652 007/1: RAL 7012 housing, RAL 7040 decorative seal
VAS 652 007/2-4: Black

Scope of Delivery:
1x basic device VAS 652 007/1
1x charging cable VAS 652 007/2
1x sensor cable VAS 652 007/3
1x update cable VAS 652 007/4
3x AAA NiMH batteries
1x operating manual on USB stick (all language versions)
1x carrying case